Parquet from parquet floors has a completely different look from typical hardwood. Initially, they consisted of many small pieces of exotic forests located in complex geometric patterns. Modern parquet parquet floors consist of a solid tile of wood, pre-laid in patterns, which simplifies its installation. Parquet parquet floors are usually the cheapest, but they are harder to reconfigure than other solid wood floors, and its service life is much shorter.
Parquet parquet floors are included in many projects, ranging from the main parcel, to the basket weaving and Christmas trees. They have large tiles consisting of geometric patterns consisting of individual wooden planks held in place by paper or plastic mesh. The visual effects of parquet parquet floors can be pretty overwhelming, and diversity can be brought to the room by simply moving the rug on a piece of furniture to expose the cover of different patterns.
Parquet floors can be attached to a wooden or concrete floor, but concrete floors often require lining to compensate for any unevenness. Since smaller pieces, arranged in different directions, lead to a decrease in overall lateral expansion, parquet is a good choice in areas where it is expected that the moisture content of the floors will change significantly over time.
Parquet floors come in various woods such as oak, cherry, mahogany, beech and walnut. It is a good idea to make a dry run of the pattern that you want to lay out, paving the test circuit before permanent installation.
Wooden tiles should be stored in the room in which they must be installed for at least 24 hours so that they can acclimate at temperature and humidity. You need to buy 5% more floors than you expect you to compensate for any mistakes. Additional material, if not needed, may come in handy later in case of damage.
Unlike strips or floorboards, parquet floors are laid in two directions at once. Parquet parquet floors should be laid starting from the center of the room and heading out to the walls. This establishes a centered and well aligned geometric pattern.
Find the center of the room, measuring from wall to wall. Tie a line of chalk between the center of opposite walls, then hook another line of chalk between two other walls. The intersection between the two lines is the center point. Ensure that the two intersecting lines form right angles. Perform a trial run of parquet along chalk lines starting in the center, working against the wall. Adjust the center so that the tiles at the edges of the room are not too thin.
Using a spatula, apply an adhesive layer on a 2-layer spatula. the area at the intersection of the chalk lines and let it thicken and become sticky. Pressing firmly, put the slab on the glue, using the lines for placement. Ensure the placement of the first tile is correct, as it will determine the layout of the entire floor. Click on the tile in place with a hammer, placing a piece of wood for scrap on top to protect the tile. If any glue is leaking out between the plates, wipe with a cloth moistened with solvent. As you work on each wall, complete one quadrant at a time. In order not to impose your weight on any one tile, use a piece of plywood as a crank board.
The last tiles against the wall must be cut to fit. They should be cut slightly smaller than the measured space to allow the wood to expand. There is usually enough space "" - "". Allow a new parquet floor to dry at least a day before use.
